11073114 | ITD22H00 SIL - фото 1 - id-p104658780

Характеристики и описание

electrical ratings
Voltage supply	5 VDC ±10 %
Reverse polarity protection	Yes
Consumption w/o load	≤100 mA
Sinewave cycles per revolution	1024 … 2048
Sensing method	Optical
Output frequency	≤180 kHz (-3 dB)
Output signals	A, B, 0
Output stages	SinCos 1 Vpp
Safety operating figures	(at +40 °C): MTTF: ≤100 years PFH: 1.2E-09 1/h SFF: 96.9 % DC: 93.4 (medium) PFDavg: 1.05E-04 1/h Service life/proof test intervall: 10 a
Protection class	III (DIN EN 61140)
Interference immunity	DIN EN 61000-6-2
Emitted interference	DIN EN 61000-6-3
Approval	SIL2 (DIN EN IEC 61508-1:2010 / IEC 61800-5-2:2016 Category 3, PLd EN ISO 13849-1:2015) With a redundant use: SIL3 (DIN EN IEC 61508-1:2010 / IEC 61800-5-2:2016 Category 4, PLe EN ISO 13849-1:2015)
mechanical design
Size (flange)	ø58 mm
Shaft type	ø58 mmø10 mm (through hollow shaft) ø12 mm (through hollow shaft) ø14 mm (through hollow shaft)
Motor shaft tolerance	ø58 mmø10 mm (through hollow shaft) ø12 mm (through hollow shaft) ø14 mm (through hollow shaft)±0,25 mm axial ± mm radial
Mounting kit	ø58 mmø10 mm (through hollow shaft) ø12 mm (through hollow shaft) ø14 mm (through hollow shaft)±0,25 mm axial ± mm radial019 (required for SIL approval) 021 (required for SIL approval)
Protection DIN EN 60529	IP 65
Degree of soiling	2 (DIN EN 61010)
Operating speed	≤6000 rpm
Starting torque	≤0,015 Nm (+20 °C)
Material	≤0,015 Nm (+20 °C)Housing: aluminium Shaft: stainless steel
Operating temperature	-30...+100 °C
Relative humidity	90 % non-condensing
Resistance	90 % non-condensingDIN EN 60068-2-6 Vibration 20 g, 60-2000 Hz DIN EN 60068-2-27 Shock 100 g, 6 ms
Connection	Board connector, 8-pin
Weight approx.	200 g