Характеристики и описание
General specifications | |
|---|---|
| Signal type | Digital Input |
Supply | |
| Connection | Power Bus or terminals 1-, 2+ |
| Rated voltage | 16.8 ... 31.2 V DC |
| Power dissipation | 0.6 W |
| Power consumption | 1.1 W |
Input | |
| Connection side | field side |
| NAMUR sensor | |
| Mechanical contact | |
| SN sensor | |
| 2-wire DC sensor | |
| S0 sensor | |
| NPN sensor | |
| PNP sensor | |
| AC/DC voltage source | |
| AC/DC voltage source | |
| AC/DC voltage source | |
Output | |
| Connection side | control side |
| Connection | terminals 3, 4: |
| Output | signal, relay |
| Contact loading | 253 V AC/2 A/cos ? > 0.7; 126.5 V AC/2 A/cos ? > 0.7; 30 V DC/2 A resistive load |
| Minimum switch current | 2 mA / 24 V DC |
| Energized/De-energized delay | ? 20 ms / ? 20 ms |
| Mechanical life | 107 switching cycles |
Transfer characteristics | |
| Switching frequency | ? 10 Hz |
Galvanic isolation | |
| Output/power supply | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff tИли отправьте нам запрос наmin |
| Input/Other circuits | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff tИли отправьте нам запрос наmin |
Indicators/settings | |
| Control elements | DIP-switch |
| Configuration | via DIP switches |
| Labeling | space for labeling at the front |
Directive conformity | |
| Electromagnetic compatibility | |
| Low voltage | |
Conformity | |
| Degree of protection | IEC 60529:2001 |
| Protection against electrical shock | EN 61010-1:2010 |
Ambient conditions | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
Mechanical specifications | |
| Degree of protection | IP20 |
| Connection | screw terminals |
| Core cross-section | 0.5 ... 2.5 mm2 (20 ... 14 AWG) |
| Mass | approx. 60 g |
| Dimensions | 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) , housing type S1 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
General information | |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Accessories | |
| Optional accessories | power feed module S1SD-2PF Power Bus POWERBUS-SETL5.*** Power Bus POWERBU |
General specifications
Доставка
Оплата и гарантии